Error Messages - C
Table C-1. Error Numbers (continued)
Error String [Description/Explanation/Examples]
Ingrd receiver buffer overrun
RS-232 receiver framing error
RS-232 receiver parity error
RS-232 receiver overrun error
Front panel buffer overrun
CAL switch prevents calibration
CAL password is incorrect
Computed readback cal constants are incorrect
Computed programming cal constants are incorrect
Incorrect sequence of calibration commands
CV or CC status is incorrect for this command
Output mode switch must be in NORMAL position
Command only applies to RS-232 interface
CURRent or VOLTage fetch incompatible with last acquisition
To Next Page