Source User’s Guide 25
Optimizing Performance
Using Amplitude Corrections
Setting up a corrections table
To set up the corrections table using the front panel, from the Corrections tab,
select Edit Correction. Click Insert Row Below to start the editing. The
Frequency and Amplitude keys allow you to enter a frequency and the
correction in dB that you require at that frequency. As you enter values the
actual entries are displayed in tabular format on the left of the display and also,
the entered values appear on the graticule as a graph. Because of the large
number of possible entries in the corrections table, the Navigate key allows
you to select an entry by row number to quickly access and edit a particular
row.
For more detailed information about the correction data keys and the remote
control commands see the online help, accessible by pressing the Help button
on the front panel (or the User’s and Programmer’s Reference).
To Next Page
Loading...
Need help?
General
