Keysight Technologies M9410A User Manual

6 Source User’s Guide
Contents
Loading a Waveform Segment into ARB memory 29
Deleting a Waveform Segment on Internal Disk 30
Deleting a Waveform Segment from ARB memory 30
Playing a Waveform Segment 30
Saving a Waveform Settings & Parameters 31
Viewing and Modifying Header Information 31
Using Waveform Markers 34
Waveform Marker Concepts 34
Marker Signal Response 35
Marker File Generation 35
Marker Point Edit Requirements 35
Saving Marker Polarity and Routing Settings 35
Selecting which Marker to output 35
Viewing a Marker Pulse 35
Using the Pulse/RF Blanking Marker Function 36
Setting Marker Polarity 37
Using the TRIGGER 2 Signal as a Transceiver Trigger 38
Triggering a Waveform 39
Trigger Type 39
Trigger Source 40
Source Alignment 41
Licensing 42
Signal Studio 42
Waveform multi-pack licensing 42
Installing an Option N7650B–22x/25x Waveform 5/50–Pack Licensing 43
Licensing a Source Waveform File 44
Waveform Licensing Interface 45
Waveform Multi–Pack Licensing Status Messages 47
Other menu functions under Multi–Pack Licenses 48
5 Troubleshooting
RF Output 50
No RF Output 50
Power Supply Shuts Down 50
No Modulation at the RF Output 50
RF Output Power too Low 50

Keysight Technologies M9410A Specifications

General

Brand	Keysight Technologies
Model	M9410A
Category	Transceiver
Language	English