Source User’s Guide 33
Basic Digital Operation
Saving a Waveform Settings & Parameters
c.Save the current settings to the file header:
Press the Save Header key.
The settings from the white text column now appear in the gray text
column. This saves the new current transceiver settings to the file
header.
If you change any of the settings listed in the file header after you select the
waveform file, the changed setting(s) appear in the file header white text
column and are used instead of the saved header settings. To reapply the
saved header settings, reselect the waveform for playback.
To Next Page
Loading...
Need help?
General
