49
Keysight M9410A/M9411A/M9415A
VXT PXI Vector Transceiver
Source User’s Guide
5 Troubleshooting
This chapter identifies some checks you can make if the source in the
transceiver is not operating as expected. For information about non-source
related problems see the Getting Started Guide.
— “RF Output” on page 50
—“No RF Output
—“Power Supply Shuts Down
—“No Modulation at the RF Output
—“RF Output Power too Low
— “Error Messages” on page 51
— “Licenses” on page 51
— “Contacting Keysight Technologies” on page 52