Keysight CXG, EXG, and MXG X-Series Signal Generators Programming Guide 169
Programming the Status Register System
Overview
Operation Status Group’s Condition Register can be referred to as the
Standard Operation Status register. Refer to “Status Groups” on page 181 for
more information.
Figure 4-1 and Figure 4-2 show the EXG/MXG’s signal generator status byte
register system and hierarchy.
The status register systems use IEEE 488.2 commands (those beginning with *)
to access the higher-level summary registers (refer to the SCPI Command
Reference). Access Lower-level registers by using STATus commands.
To Next Page
Loading...
