Keysight Technologies N5224A User Manual

Page 7Find us at www.keysight.com
PNA Family Network Analyzer Configurations (continued)
Application options (continued)
To add options to a product, order the corresponding item number (N52xxA-xxx).
Description For PNA-X Series For PNA Series For PNA-L Series Additional Information
Pulse, antenna, mm-wave
Pulsed-RF measurements N524xA-008 N522xA-008 n/a Requires Option 025
Add IF inputs N524xA-020 N522xA-020 n/a
Add pulse modulator to internal 1st source N524xA-021 N522xA-021 n/a
Add pulse modulator to internal 2nd source N524xA-022 N522xA-022 n/a Requires one of Option 224, 400, 401, 417, 419, or 423
Add four internal pulse generators N524xA-025 N522xA-025 n/a
Fast CW sweep N524x A-118 N522xA-118 n/a
Nonlinear vector network analysis
1
Nonlinear component characterization N524xA-510
4
n/a n/a Requires Options 419 and 080, or 400, H85 and 080
Nonlinear component characterization N524xA-511
4
n/a n/a Export-control version. Requires Options 419 and 080, or
400, H85, and 080
Nonlinear X-parameters
2
N524xA-514
5
n/a n/a Requires Options 423 and 510 or 511, requires MXG or PSG
except 10 MHz tone-spacing
Nonlinear pulse envelope domain N524xA-518 n/a n/a Requires Options 021, 025 and 510 or 511
Arbitrary load-inpedance X-parameters N524xA-520 n/a n/a Requires Option 514, requires MXG or PSG except 10 MHz
tone-spacing
PNA-X Series
N5249A 10 MHz to 8.5 GHz
N5241A 10 MHz to 13.5 GHz
N5242A 10 MHz to 26.5 GHz
N5244A 10 MHz to 43.5 GHz
N5245A 10 MHz to 50 GHz
N5247A 10 MHz to 67 GHz
PNA Series
N5221A 10 MHz to 13.5 GHz
N5222A 10 MHz to 26.5 GHz
N5224A 10 MHz to 43.5 GHz
N5225A 10 MHz to 50 GHz
N5227A 10 MHz to 67 GHz
PNA-L Series
N5239A 300 kHz to 8.5 GHz
N5231A 300 kHz to 13.5 GHz
N5232A 300 kHz to 20 GHz
N5234A 10 MHz to 43.5 GHz
N5235A 10 MHz to 50 GHz
1. To configure NVNA, requires two comb generators with power supplies, Keysight
calibration kits (mechanical or ECal), power meter and sensor or USB power sensor.
Requires EXG, MXG or PSG for X-parameter extraction (PNA-X 10 MHz reference
output can be used for 10 MHz tone-spacing applications).
2. X-parameters is a trademark and registered trademark of Keysight Technologies in
the US, EU, JP, and elsewhere. The X-parameters format and underlying equations
are open and documented. For more information, visit http://www.Keys ight.com/
find/eesof-x-parameters-info.
3. Additional hardware required. Please refer to the analyzer’s Service Guide for required
service test equipment.
4. Pulse capability requires option 021 and 025
5. Pulse capability requires option 021, 022 and 025
Accessories, calibration options
To add options to a product, order the corresponding item number (N52xxA-xxx).
Description For PNA-X Series For PNA Series For PNA-L Series Additional Information
Accessories
Rack mount kit for use without handles N524xA-1CM N522xA-1CM N523xA-1CM
Rack mount kit for use with handles N524xA-1CP N522xA-1CP N523xA-1CP
Pulse I/O adapter N1966A N1966A n/a
Comb generator
1
U9391C/F/G n/a n/a
Calibration software
Perpetual license for built-in performance test
software for Keysight inclusive calibration
3
N524xA-897 N522xA-897 N523xA-897
Perpetual license for built-in performance test
software for standard compliant calibration
3
N524xA-898 N522xA-898 N523xA-898
Calibration documentation
ISO 17025 compliant calibration N524xA-1A7 N522xA-1A7 N523xA-1A7
Commercial calibration certicate with test data N524xA-UK6 N522xA-UK6 N523xA-UK6
ANSI Z540 compliant calibration N524xA-A6J N522xA-A6J N523xA-A6J

Keysight Technologies N5224A Specifications

General

Brand	Keysight Technologies
Model	N5224A
Category	Measuring Instruments
Language	English