22 Keysight CXG, EXG, and MXG X-Series Signal Generators Programming Guide
Getting Started with Remote Operation
IO Libraries and Programming Languages
Keysight VISA VISA is an IO library used to develop IO applications and
instrument drivers that comply with industry standards.
Use the Keysight VISA library for programming the
signal generator over the LAN interface.
SICL Keysight SICL is a lower level library that is installed
along with Keysight VISA.
Programming Languages
Along with Standard Commands for Programming Instructions (SCPI) and IO
library functions, you use a programming language to remotely control the
signal generator. Common programming languages include:
—C/C++
—C#
—MATLAB
® (MATLAB is a registered trademark of The MathWorks.)
—HP Basic
—LabView
— Java™ (Java is a U.S. trademark of Sun Microsystems, Inc.)
—Visual Basic
®
(Visual Basic is a registered trademark of Microsoft
Corporation.)
—PERL
—Keysight VEE
For examples, using some of these languages, refer to Chapter 3.
To Next Page
Loading...
