Keysight Technologies X Series Programming Guide

316 Keysight CXG, EXG, and MXG X-Series Signal Generators Programming Guide
Creating and Downloading Waveform Files
Programming Examples
30: Defines arrays for I and Q waveform points. Sets them to be integer arrays.
40: Sets HP BASIC to use degrees for cosine and sine functions.
50: Sets up loop to calculate waveform points.
60: Calculates I waveform points.
70: Calculates Q waveform points.
80: End of loop.
160 and 210: The I and Q waveform files have the same name
90 to 300 See the table on page 312 for program comments.
Program Comments (Continued)

Keysight Technologies X Series Specifications

General

Brand	Keysight Technologies
Model	X Series
Category	Measuring Instruments
Language	English