Keysight CXA N9000A - Page 558

8 Frequency Scan Measurement
Save
Header On/Off
Enables you to choose whether or not to show Trace Header information in the report.
Key Path
Save, Data, Meas Result, Trace
Remote Command
:MMEMory:RESults:TRACe:HEADer ON|OFF|0|1
:MMEMory:RESults:TRACe:HEADer?
Example :MMEM:RES:TRAC:HEAD ON
Preset Not part of Preset, but is reset to ON by Restore Mode Defaults; survives
Shutdown.
State Saved Saved in instrument state
Range On|Off
Initial S/W Revision A.10.00
SettingOn/Off
Enables you to choose whether or not to show trace setting in the report.
Key Path
Save, Data, Meas Result, Trace
Remote Command
:MMEMory:RESults:TRACe:SETTing ON|OFF|0|1
:MMEMory:RESults:TRACe:SETTing?
Example :MMEM:RES:TRAC:SETT ON
Preset Not part of Preset, but is reset to ON by Restore Mode Defaults; survives
Shutdown.
State Saved Saved in instrument state
Range On|Off
Initial S/W Revision A.10.00
Trace Data On/Off
Enables you to choose whether or not to show trace data in the report.
Key Path
Save, Data, Meas Result, Trace
Remote Command
:MMEMory:RESults:TRACe:DATA ON|OFF|0|1
:MMEMory:RESults:TRACe:DATA?
Example :MMEM:RES:TRAC:DATA ON
Preset Not part of Preset, but is reset to OFF by Restore Mode Defaults; survives
Shutdown.
State Saved Saved in instrument state
Range On|Off
Initial S/W Revision A.10.00
558 EMI Receiver Mode Reference