Keysight CXA N9000A - DbµV

9 Strip Chart Measurement
AMPTD Y Scale
W
Sets the amplitude unit for the selected amplitude scale (log/lin) to watt.
Key Path
AMPTD Y Scale, Y Axis Unit
Example UNIT:POW W
Dependencies Grayed out if an Amplitude Correction with an Antenna Unit is ON.
Readback W
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00
V
Sets the amplitude unit for the selected amplitude scale (log/lin) to volt.
Key Path
AMPTD Y Scale, Y Axis Unit
Example UNIT:POW V
Dependencies Grayed out if an Amplitude Correction with an Antenna Unit is ON.
Readback V
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00
A
Sets the amplitude unit for the selected amplitude scale (log/lin) to Ampere.
Key Path
AMPTD Y Scale, Y Axis Unit
Example UNIT:POW A
Dependencies Grayed out if an Amplitude Correction with an Antenna Unit is ON.
Readback A
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00
dBµV
Sets the amplitude unit for the selected amplitude scale (log/lin) to dBµV.
Key Path
AMPTD Y Scale, Y Axis Unit
EMI Receiver Mode Reference 615