Keysight E4990A - How to Exit from the E4990 A Measurement View

Troubleshooting 1
Impedance Analyzer 19
How to exit from the E4990A Measurement View
Some troubleshooting procedures require you to exit from the
E4990A Measurement View. The following procedure describes the
steps to to exit from the E4990A Measurement View.
Step 1. Connect a mouse to the connectors on the E4990A rear
panel.
Step 2. Turn the instrument on.
Step 3. Press key.
Step 4. Click Service.
Step 5. Click Exit.
Step 6. Click Yes in Exit menu. The E4990A exits from
Measurement View to Windows desktop.
Figure 1 Exit dialog box
NOTE
If you want to return to the Measurement View, double-click the” E4990A”
icon on the desktop.
NOTE
if you need to shut down the E4990A, press the standby switch on the
front panel.