05 | Keysight | E5063A ENA Series Network Analyzer - Configuration Guide
Test Accessories and Calibration Kits
Test accessories and calibration kits that can be used with the E5063A are listed in this section. A complete line of test accessories
and calibration kits can be found at the following websites:
http://www.keysight.com/find/na_accessories
http://www.keysight.com/find/accessories
Test accessories
Test accessories such as test port cable are necessary for a complete measurement system using the E5063A. Order test accessories
in accordance with the desired measurement system.
Calibration kits
Calibration is an accuracy enhancement procedure that effectively reduces the system errors that cause uncertainty in network
measurement. Calibration kit is necessary to perform the calibration.
– Mechanical calibration kits include standards, such as opens, shorts and loads, which are measured by the network analyzer.
Choose a calibration kit for each connector type to be used.
– Electronic calibration (ECal) modules replace mechanical calibration standards with one solid-state calibration module that is
controlled by the network analyzer via USB. ECal modules provide many different impedances to the test ports which enables a
full two-port calibration to be performed quickly with a single connection. This technique reduces operator errors and connector
wear and abrasion.
Category Product Number Description
Cables N6314A 50 Ω type-N (m) to type-N (m) cable, DC to 12.4 GHz, 61 cm (24 in)
N6315A 50 Ω type-N (m) to type-N (f) cable, DC to 12.4 GHz, 61 cm (24 in)
11500E 3.5 mm (m) to 3.5 mm (m) cable, 61 cm (24 in)
11500F 3.5 mm (m) to 3.5 mm (m) cable, 152 cm (60 in)
Adapters 11853A 50 Ω Type-N accessory kit
11878A Type-N to 3.5 mm adapter kit
Category Product Number Description
Mechanical calibration kits 85032F Standard Mechanical Calibration Kit, DC to 9 GHz, Type-N, 50 Ω
85054D Economy Mechanical Calibration Kit, DC to 18 GHz, Type-N, 50 Ω
Electronic calibration kits 85092C RF ECal: 300 kHz to 9 GHz, 2 ports, Type-N, 50 Ω
N4431B Microwave ECal: 9 kHz to 13.5 GHz, 4 ports
N4432A Microwave ECal: 300 kHz to 18 GHz, 4 ports
N4690C Microwave ECal: 300 kHz to 18 GHz, 2 ports, Type-N, 50 Ω
Literature Resource
Web Resource
Get the latest news, product and support information, application literature and more.
http://www.keysight.com/find/e5063a
Description Publication number
E5063A Network Analyzer Data Sheet 5991-3615EN
E5063A Network Analyzer Brochure 5991-3614EN
E5063A PCB Analyzer Technical Overview 5991-3617EN
Network Analyzers Selection Guide 5989-7603EN
More literature is available on our web site.
To Next Page
Loading...
