6 Keysight Infiniium S-Series Oscilloscopes User’s Guide
In This Guide
This guide provides the information you need to begin using the Infiniium S-Series
oscilloscopes.
Chapter 1, “Setting Up the Oscilloscope,” starting on page 11, includes unpacking
steps, power and air flow requirements, and other setup information.
Chapter 2, “Using the Oscilloscope,” starting on page 25, familiarizes you with the
inputs and outputs, front-panel controls, and user interface, and describes how to
perform basic operations with the oscilloscope.
Chapter 3, “Online Help and Other Information,” starting on page 49, describes
the Infiniium oscilloscope application’s online help contents and online demos. The
online help describes how to use the Infiniium oscilloscope application in detail.
For More Information
• For detailed information on how the oscilloscope makes measurements and
how to use the oscilloscope, see the Infiniium oscilloscope application’s online
help. See "Accessing the Online Help" on page 49.
• For information on controlling the oscilloscope from a remote computer, see
the Oscilloscopes Programmer’s Reference found in the Infiniium oscilloscope
application’s online help.
• For information on testing and servicing the oscilloscope, see the Service Guide
found in the Infiniium oscilloscope application’s online help.
For technical assistance, contact your local Keysight Technologies representative
at http://www.keysight.com/find/contactus.
To Next Page
Loading...
