Electronic Calibration Modules Reference Guide 2-7
Preparing ECal for Use
Kit Contents
N4432D and N4433D Series Kit Contents
The following tables list the items in each N4432D and N4433D kit. For the
N4432D kit, Option 020 is configured with type-N 50 ohm -f- connectors on all
ports. For the N4433D kit, Option 010 is configured with 3.5 mm -f- connectors
on all ports. See Table 1-6 on page 1-16 and Table 1-7 on page 1-16 for other
configurations available.
Table 2-7 N4432D Kit Contents
Qty Description Part No.
N4432D Option 020
1 N4432D, ECal Module --
1 Calibration certificate 5962-0476
1 Torque Wrench 3/4 in, 1.3 N–m 8710-1766
1 USB A-plug to micro-B plug Cable, 2 m 8121-2671
1 QuickStart Guide N4431-90004
Table 2-8 N4432D Kit Contents
Qty Description Part No.
N4432D Mixed Connector Options
a
a. Torque wrench varies with options.
1 N4432D, ECal Module --
1 Calibration certificate 5962-0476
1 USB A-plug to micro-B plug Cable, 2 m 8121-2671
1 QuickStart Guide N4431-90004
To Next Page
Loading...
