Basic Operation
Some Helpful Tips
32
Is your product software up- to- date? Periodically, Keysight
releases software updates to fix known defects and
incorporate product enhancements. To search for software
updates for your product, go to the Keysight Technical
Support website at www.keysight.com/find/techsupport.
IO Configuration
The N9320B spectrum analyzer provides 3 types of IO
connnection: USB, LAN and optional GPIB interface. Press
> {IO Configure} to select the corresponding interface as
your need.
USB
Select USB to enable the USB connection for remote control.
LAN
The N9320B supports LAN port connection for remote
control. Press > {More} > {More} > {IP Admin} to set the
IP parameters for the network connection.
Press {IP Select Static} to manually set the IP address, gateway
and subnet mask with the proper LAN information, or just
press {IP Select DCHP} to set the IP address in LAN
dynamically according DCHP.
Press {Apply} to enable all the parameters you set.
Press > {IO Configure} > {LAN} to enable the LAN
connection according to the IP configuration you set.
GPIB
Press > {GPIB Address} to set the GPIB address for the
analyzer.
Press > {IO Configure} > {GPIB} to enable the GPIB
connection. The GPIB softkey is only vaild after the option
G01 installed.
Preset/
System
Preset/
System
Preset/
System
Preset/
System
Preset/
System
To Next Page
Loading...
