33
Basic Operation
Remote Control
Remote Control
The N9320B spectrum analyzer is capable of being connected
to a PC via USB, LAN or optional GPIB connection, allowing
the analyzer to be operated in remote mode.
The configuration for setting up a remote control for your
N9320B is easily done: connect your N9320B using a
USB/network cable to a PC which has had Keysight IO
libraries suite installed.
When connecting a PC to the spectrum analyzer, power on
the spectrum analyzer. The PC will then detect if there is a
connection to the spectrum analyzer.
To maximize the flexibility of the remote control feature, use
SCPI commands to create your own programs.
Installing Keysight IO libraries suite
Before remotely control your N9320B, you need to install
Keysight IO libraries suite on your PC. The Keysight IO libraries
suite is a general purpose instrument driver for all Keysight
test and measurement instruments. This software is in the
documentation CD with the shipment, or download the latest
version from
http://www.keysight.com/find/iolib
Follow the windows wizard to finish the installation. Then,
you have successfully set up an environment for remotely
controlling your N9320B.
Remot e
Stan dby
On
TG SOU RCE CAL OUT
50MHz 10dBm
7
·
4
1
0
2
5
89
6
3
Back
Enter
Marker
Peak
Search
Marker
Auto
Tune
Det/
Display
File/
Prin t
BW/
Avg
View/
Trace
MeasMODE
Sweep/
Trig
Local
Save
N9320A SPECTRUM ANALYZER 9 kHz - 3.0 GHz
PROBE POWER
RF IN 50
50VDC M AX
30dBm 1W MAX
CAT Ⅱ
USB/LAN/
GPIB cable
To Next Page
Loading...
