Keysight P937xA PXIe Service Guide 55
Replaceable Parts Listings
Assembly Replacement Procedure
Assembly Replacement Procedure
The following steps describe how to replace an assembly in the analyzer.
Step 1. Identify the faulty group. Begin with Chapter 3 “Troubleshooting” Follow up
with the appropriate troubleshooting chapter that identifies the faulty
assembly.
Step 2. Order a replacement assembly. Refer to this chapter for part numbers and
ordering information.
Step 3. Replace the faulty assembly and determine what adjustments and
performance tests are necessary. Refer to Chapter 5, “Removal and
Replacement Procedures.”
Step 4. Perform the “The Operator’s Check” on page 3-33 and “System Verification”
on page 3-36.
To Next Page
Loading...
