Keysight PNA-X N5241A - Probe; Power Meters and Sensors; Comb Generators; Amplifiers

36 | Keysight | PNA Family Microwave Network Analyzers - Congurations Guide
1. For the latest guide to power meters and power sensors, refer to the Keysight web site: www.keysight.com/nd/powermeters
2. 5063-9224 is a complete rack mount kit with handles. N52xxA comes with ruggedized handles, which must be replaced with classic handles
shipped with the kit. 5063-9230 is a pair of classic handles, and used with 5063-9237 for mounting N52xxA to a rack.
General Accessories, continued
Probe
– 85024A high-frequency probe; provides high-impedance
in-circuit test capability from 300 kHz to 3 GHz.
Power meters and sensors
1
Recommended for self support, adjustments and performance
tests to verify proper instrument operation.
– N1913A EPM power meter (single channel)
– N1914A EPM power meter (dual channel)
– N8481A power sensor, 10 MHz to 18 GHz, -35 to +20 dBm
– N8481B power sensor, 10 MHz to 18 GHz, -5 to +44 dBm
– N8481H power sensor, 10 MHz to 18 GHz, -15 to +35 dBm
– N8482A power sensor, 100 kHz to 6 GHz, -35 to +20 dBm
– N8482B power sensor, 100 kHz to 6 GHz, -5 to +44 dBm
– N8482H power sensor, 100 kHz to 6 GHz, -15 to +35 dBm
– N8485A power sensor, 50 MHz to 26.5 GHz, -35 to +20 dBm
– N8485A-033 average power, 10 MHz to 33 GHz, -35 to
+20 dBm, 3.5 mm (m)
– N8486AQ waveguide, 33 to 50 GHz, -35 to +20 dBm
– N8486AR waveguide, 26.5 to 40 GHz, -35 to +20 dBm
– N8487A power sensor, 50 MHz to 50 GHz, -35 to +20 dBm
– N8488A power sensor, 10 MHz to 67 GHz, -35 to +20 dBm
– V8486A waveguide power sensor, 50 to 75 GHz , -30 to
+20 dBm
– W8486A waveguide power sensor, 75 to 110 GHz , -30 to
+20 dBm
– U2000A USB sensor, 10 MHz to 18 GHz, -60 to +20 dBm
– U2000B USB sensor, 10 MHz to 18 GHz, -30 to +44 dBm
– U2000H USB sensor, 10 MHz to 18 GHz, -50 to +30 dBm
– U2001A USB sensor, 10 MHz to 6 GHz, -60 to +20 dBm
– U2001B USB sensor, 10 MHz to 6 GHz, -30 to +44 dBm
– U2001H USB sensor, 10 MHz to 6 GHz, -50 to +30 dBm
– U2002A USB sensor, 50 MHz to 24 GHz, -60 to +20 dBm
– U2002A-H26 USB sensor, 10 MHz to 26.5 GHz, -60 to
+20 dBm
– U2002H USB sensor, 50 MHz to 24 GHz, -50 to +30 dBm
– U2004A USB sensor, 9 kHz to 6 GHz, -60 to +20 dBm
– E4412A CW power sensor, 10 MHz to 18 GHz, -70 to
+20 dBm
– E4413A CW power sensor, 50 MHz to 26.5 GHz, -70 to
+20 dBm
– E4413A-H33 specied performance for 50 MHz to 33 GHz
Comb generators
Two are required for NVNA. Also requires separate power supply.
– U9391C 10 MHz to 26.5 GHz comb generator
– U9391F 10 MHz to 50 GHz comb generator
– U9391G 10 MHz to 67 GHz comb generator
Ampliers
– 83006A power amplier, 10 MHz to 26.5 GHz, 20 dB gain,
power out: +18 dBm to 10 GHz or +16 dBm to 20 GHz or
+14 dBm to 26.5 GHz
– 83017A power amplier, 50 MHz to 26.5 GHz, 25 dB gain,
power out: +20 dBm to 20 GHz, or +15 dBm to 26.5 GHz
– 83018A power amplier, 2 to 26.5 GHz, 27 dB gain to 20 GHz
or 23 dB to 26.5 GHz, power out: +24 dBm to 20 GHz or
+21 dBm to 26.5 GHz
– 83020A power amplier, 2 to 26.5 GHz, 30 dB gain to 20 GHz
or 27 dB to 26.5 GHz, power out: +30 dBm to 20 GHz or
+26 dBm to 26.5 GHz
– 83050A power amplier, 2 to 50 GHz, 23 dB gain, power out:
+20 dBm to 40 GHz or +17 dBm to 50 GHz
– 83051A power amplier, 45 MHz to 50 GHz, 23 dB gain
power out: +12 dBm to 45 GHz or +10 dBm to 50 GHz
Couplers
– 87300B coaxial coupler, 1 to 20 GHz, SMA (f), 10 dB
coupling
– 87300C coaxial coupler, 1 to 26.5 GHz, 3.5 mm (f), 10 dB
coupling
– 87301B coaxial coupler, 10 to 46 GHz, 2.92 mm (f), 10 dB
coupling
– 87301D coaxial coupler, 1 to 40 GHz, 2.4 mm (f) or optional
2.92 mm (f), 13 dB coupling
– 87301E coaxial coupler, 2 to 50 GHz, 2.4 mm (f), 10 dB
coupling
– 87310B 90
o
coaxial coupler, 1 to 18 GHz, SMA (f), 3 dB
coupling
Equipment rack accessories
– E3663AC Rail kit (included with Option 1CM and 1CP)
– CM042A Rack mount kit, for use without handles (included
with Option 1CM)
– 5063-9224 Rack mount kit with handles
2
– 5063-9230 Front handle kit
2
– 5063-9237 Rack mount kit, for use with classic handles
(included with Option 1CP)
2
Monitors
– VGA-compatible monitor
Interface cables
Choose the appropriate cables to connect each peripheral to the
network analyzer.
– 10833A GPIB cable, 1.0 m (3.3 ft)
– 10833B GPIB cable, 2.0 m (6.6 ft)
– 10833D GPIB cable, 0.5 m (1.6 ft)
– 82357B GPIB to USB interface