Keysight U1231A - Setup Menu Items; Changing the Variation Count; Figure 4-1 Changing the Variation Count

4 Multimeter Setup Options
Setup Menu Items
84 U1231A/U1232A/U1233A User’s Guide
Setup Menu Items
Changing the variation count
This setting is used with the Auto Hold- Log function (see
page 72). When the variation of the measured value exceeds
the value of the variation count, the Auto Hold- Log function
will be ready to trigger.
Use this Setup item to change the variation count for the
Auto Hold- Log function between 1 to 999 counts.
Figure 4-1 Changing the variation count
Parameter Range Default setting
AutoHold (001 to 999) counts 50 counts
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press