Keysight U2020 X Series - Figure 2-6 Creating Datalog Display View; Figure 2-7 Selecting One of the Measurements

General Operating Information 2
Keysight U2020 X-Series User’s Guide 27
a Indicates acquisition of measurements in the Run mode
b Indicates the measurement status
c Change the title at the top of the display view
Reset the displayed Minimum/Maximum measured values
d Summary of alert limit conditions for the current measurement
6 To monitor the average power over a period of time, create a Datalog display view by
clicking .
Figure 2-6 Creating Datalog display view
Select one of the available measurements from the list and click Ok.
Figure 2-7 Selecting one of the measurements