KFI SE25 - SE25 Specifications; Performance Specifications; Line Pull and Cable Capacity

13
SE25
SE25 Specications
Performance Specications
Rated Pull 2,500 lbs (1134 kg)
Gear Reduction Ratio 171:1
Motor Permanent Magnet
1.2 HP (DC 12V)
Drum Size 1.5” (D) x 3.15” (L)
38 mm (D) x 80.0 mm (L)
Synthetic Cable 3/16” (D) x 50.0’ (L)
4.8 mm (D) x 15.24 m (L)
(48 useable feet with ve
wraps on the winch drum)
Weight 24.3 lbs. (complete kit)
Height 4.2 inches (107 mm)
Width 4.06 inches (103 mm)
Length 12.67 inches (322 mm)
Bolt Pattern 4-7/8” x 3” (124mm x 76 mm)
Line Speed and Motor Current (First Layer)
Line Pull Max lbs 0 1000 1500 2000 2500
kgs 0 454 680 907 1134
Line Speed
(12 VDC)
FPM 8.86 7.55 6.23 5.25 4.27
MPM 2.7 2.3 1.9 1.6 1.3
Max Current amps 15 50 80 120 170
Cooling Time minutes 5 5 5 5 5
Line Pull and Cable Capacity
Layers of cable on drum 1 2 3 4 5
Max pulling capacity per
layer
lbs 2500 2033 1713 1480 1303
kgs 1134 922 777 671 591
Cable capacity
per layer
ft 7.15 15.45 24.7 34.5 50
m 2.18 4.71 7.52 10.52 15.24