EasyManua.ls Logo

KI CATALYST 5 - Cleaning and Sanitizing Procedures

Default Icon
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
V. MAINTENANCE AND CARE
A. Maintenance Table (Continued)
Pressure Conversion Table
B. Cleaning
CAUTION: Washing upholstered components containing flame retardants, as indicated on
the labeling of the upholstery, may reduce the flame retardants’ efficacy over time. This
may increase the risk of ignition when exposed to open flame or other ignition sources,
which may increase the risk of injury.
Axles, Wheels, Tires and Moving Parts:
1. Clean around the axles and wheels weekly with a damp rag.
2. Hair and lint will lodge in and around the caster housing and rear wheel axles. Remove with a
stiff brush or pick. Take care not to damage bearing seals.
Painted Surfaces
1. Hand wash using a cloth and mild detergent.
2. Dry using a clean cloth or allow wheelchair to air dry.
3. Nonabrasive wax may be used to help preserve painted surfaces.
Upholstery:
1. Hand wash using a cloth and mild detergent.
2. Allow upholstery to air dry. DO NOT machine dry.
Plastic Components
1. Hand wash using a cloth and mild detergent.
2. Do not use solvents or aggressive cleaners as they may damage plastic components.
Sanitizing
1. Disinfect surfaces with over the counter disinfecting sanitizer of at least 70% alcohol or
wipes. Do not soak or allow pooling of cleaning solutions.
2. Allow sanitizer to remain on surface for at least 15 minutes and remove with aseptic cloth.
PSI kPa
20 138
30 207
40 276
50 345
60 414
70 483
80 552
90 621
100 689
110 758
120 827
130 896
140 965
150 1034
Fig. 34