33
Listening to stations
1. Press the “RADIO” button to select
the radio.
2. Press the “RADIO” repeatedly to
select a band.
The mode switches as follows.
FM → AM → FM...
✽Note
To select the FM/AM by touching the
screen, touch
on the screen to
select the AM and then touch
.
3. Auto tuning:
Touch
/ on the screen. Or
press / on the control panel.
- When a station is received, search-
ing stops.
Manual tuning:
Rotate the right knob leftward/right-
ward on the control panel.
- The frequencies move up and
down step by step.
Storing and recalling stations
You can easily store up to 12 preset sta-
tions for later recall at the touch of a
button.
1. Select the band (FM, AM) you want to
store a station into.
2. Select the desired frequency.
3. Touch [Presets] on the screen.
4. Touch and hold one of the preset
buttons.
The preset station information will be
displayed.
The selected preset station has been
stored in memory.
If you move to the previous/next
page, touch / .
5. Repeat steps 1 ~ 4 to preset other
stations.
Next time if you touch the
preset but-
tons
, stations are recalled from the
memory.
✽Note
When station is preset on a number of
which another station has already been
preset, the previously preset station is
erased.
33
Radio operation
To Next Page
Loading...
Need help?
General
