3939
Troubleshooting
Symptom Cause Correction
Power doesn’t turn on.
The unit doesn’t operate.
The ignition switch is NOT turned ON. Turn the ignition switch to ON.
The ignition switch is NOT set to ACC. Set the ignition switch to ACC.
The power of unit is turned OFF.
Turn the unit on by pressing
on the
control panel.
Noise and other factors are causing the
built-in microprocessor to operate
incorrectly.
Turn the unit off and then on.
Playback is not possible. The disc is dirty. Clean disc.
The loaded disc is a type this unit
cannot play.
Check what type the disc is.
The disc is inserted upside down. Insert the disc with the label upward.
The files on the disc are an irregular
file format.
Check the file format.
There’s no sound. The volume level is low. Adjust the volume.
The mute is on. Turn the mute off.
To Next Page
Loading...
Need help?
General
