H15
6. Remove any dust on the charging
connector and charging inlet.
7. Hold the charging connector han-
dle and insert it into the charging
inlet while pressing the release
button(1), until you hear a click
sound. If it is not fully connected,
improper connection between the
charging connector and the charg-
ing terminals are a potential fire
hazard.
8. Charging starts automatically.
Check if the power lamp and charg-
ing lamp (orange) are ON.
9. Check if the charging cable con-
nection indicator of the high volt-
age battery in the instrument clus-
ter is turned ON.
Charging does not occur when the
indicator is OFF. When the charg-
ing connector is not connected
properly, reconnect the charging
cable to charge.
OJFHPQ016026 OJFHPQ016016L OJFHP046428L
To Next Page
Loading...
