69
Specifications & Consumer information
RECOMMENDED LUBRICANTS AND CAPACITIES
To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality.
The correct lubricants also help promote engine efficiency that results in improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
*
1
Refer to the recommended SAE viscosity numbers on the next page.
*
2
Engine oils labeled Energy Conserving Oil are now available. Along with other additional benefits, they contribute to fuel economy by reducing
the amount of fuel necessary to overcome engine friction. Often, these improvements are difficult to measure in everyday driving, but in a year’s
time, they can offer significant cost and energy savings.
*
3
If the API SM engine oil is not available, you can use API SN or above.
*
4
If the ILSAC GF-4 engine oil is not available, you can use ILSAC GF-5 or above.
Lubricant Volume Classification
Engine oil *
1
*
2
(drain and refill)
Recommends
4.1 l (4.33 US qt.)
API SM or above*
3
, ILSAC GF-4 or above*
4
,
ACEA-A5 or above
Automatic transaxle fluid
6.0 l (6.34 US qt.)
- ATF SP-IV
(Recommended SK, MICHANG, NOCA)
Coolant
6.74 l (7.12 US qt.)
Mixture of antifreeze and water
(Ethylene glycol base coolant for aluminum radiator)
Inverter coolant
3.13 l (3.30 US qt.)
Mixture of antifreeze and water
(Ethylene glycol base coolant for aluminum radiator)
Brake
0.49 ± 0.02 L
(0.52 ± 0.02 US qt.)
DOT 3 or DOT 4
Fuel
Hybrid
65 l (17.17 US gal.)
Refer to Fuel requirements in chapter 1.
Plug-in hybrid
55 l (14.52 US gal.)
To Next Page
