Maintenance
927
Interior light bulb replacement
1. Using a flat-blade screwdriver, gently
pry the lens from the interior light
housing.
2. Remove the bulb by pulling it straight
out.
3. Install a new bulb in the socket.
4. Align the lens tabs with the interior
light housing notches and snap the
lens into place.
CAUTION
Use care not to dirty or damage
lens, lens tab, and plastic housings.
WARNING
Prior to working on the Interior
Lights, ensure that the “OFF” but-
ton is depressed to avoid burning
your fingers or receiving an electric
shock.
■ Type A
Map lamp
OTF070038/OTF070039/OTF070040
Room lamp
■ Type B
Vanity mirror lamp
Trunk lamp
Glove box lamp
OVG079040/H/OTF070041/OTF070042/H
To Next Page
Loading...
