Driver assistance system
1366
Reverse Parking Collision-Avoidance Assist (PCA)
You can adjust the Warning Methods
with the ignition switch or ENGINE
START/ STOP button in the ON position.
僅 Warning Volume : Select 'User Set
-
tings → Driver Assistance → Warning
Volume' on the LCD display or 'Set
-
tings → Vehicle → Driver Assistance
→ Warning Methods → Warning vol
-
ume' on the Infotainment system.
Even if '0' or 'Off' is selected, the func
-
tion's Warning Volume will not turn off
but the volume will sound as '1' or
'Low'
僅 Steering Wheel Vibration Warning:
Select 'User Settings → Driver Assis
-
tance → Haptic warning' on the LCD
display or 'Settings → Vehicle →
Driver Assistance → Warning Methods
→ Haptic warning' on the Infotain
-
ment system.
If you change the warning volume, the
Warning Volume of other Driver Assis
-
tance systems may change.
僅 Ensure that warning sound you have
set may apply to the warning volume
of other driver assistance systems.
僅 Warning Methods will maintain its last
setting even if the vehicle is restarted.
僅 With the Warning Volume in '0' or
'Off', if you turn off Steering Wheel
Vibration Warning, the Warning Vol
-
ume will be activated with volume '2'
or 'Medium'.
僅 With the Steering Wheel Vibration
Warning off, if you adjust the Warning
Volume to '0' or 'Off', the Steering
Wheel Vibration Warning will be acti
-
vated.
僅 The setting menu may not be avail
-
able for your vehicle depending on
the vehicle features and specifica
-
tions.
僅 Descriptions of each driver assistance
system may be slightly different from
the owner's manual after updating the
software of your infotainment system.
In this case, scan the QR code in the
infotainment system manual to
access the web manual to review the
changes.
僅 Depending on your update, the menu
may be displayed as 'Warning Sound'
or 'Warning Methods'.
Reverse Parking Collision-Avoid
-
ance Assist operation
Operating conditions
If 'Rear Active Assist' or 'Rear Warning
Only' is set from the Settings menu,
Reverse Parking Collision-Avoidance
Assist will be in the ready status when
the following conditions are satisfied:
僅 The liftgate is closed
僅 The gear is shifted to R (Reverse)
僅 Vehicle speed is below 10 km/h (6
mph)
僅 Function components such as the
wide-rear view camera and the rear
ultrasonic sensors are in normal con
-
ditions