*IF EQUIPPED ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
Driver Position Memory System*
The integrated system stores into memory the position of the
driver’s seat, outside rearview mirrors, and steering wheel
positions. To store positions into memory, first place the gear
shift into P (Park) while the Engine Start/Stop button is in the
ON position. Then:
1. Adjust the driver’s seat, outside rearview mirrors, settings
and steering wheel positions
2. Press the SET button
A
on the control panel. System will beep once
3. Press one of the memory buttons 1 or 2
B
within 4 seconds. The system
will beep twice when memory has been stored
Front Seat Headrest Adjustment*
E
To raise headrest: Pull headrest up.
To lower headrest: Press lock
E
, then press the headrest down.
37
SEATING
(Located on driver’s door control panel)
A
B