Kia Stinger 2019 - High Beam Operation

4123
Features of your vehicle
High beam operation
To turn on the high beam headlamp,
push the lever away from you when
the headlight is on. The lever will
return to its original position.
The high beam indicator will light
when the headlight high beams are
switched on.
To prevent the battery from being
discharged, do not leave the lights
on for a prolonged time whilst the
engine is not running.
WARNING
Do not use high beam when
there are other vehicles. Using
high beam could obstruct the
other driver’s vision.
CAUTION
• Never place anything over the
sensor (1) located on the
instrument panel. This will
ensure better auto-light sys-
tem control.
• Don’t clean the sensor using a
window cleaner. The cleaner
may leave a light film which
could interfere with sensor
operation.
• If your vehicle has window tint
or other types of metallic coat-
ing on the front windscreen,
the Auto light system may not
work properly.
OCK047414
OCK047414R
■ Type A
■ Type B