Specifications & Consumer information
128
Recommended SAE viscosity
number
Engine oil viscosity (thickness) has
an effect on fuel economy and cold
weather operating (engine start and
engine oil flowability). Lower viscosi-
ty engine oils can provide better fuel
economy and cold weather perform-
ance, however, higher viscosity
engine oils are required for satisfac-
tory lubrication in hot weather.
CAUTION
Always be sure to clean the area
around any filler plug, drain
plug, or dipstick before check-
ing or draining any lubricant.
This is especially important in
dusty or sandy areas and when
the vehicle is used on unpaved
roads. Cleaning the plug and
dipstick areas will prevent dirt
and grit from entering the
engine and other mechanisms
that could be damaged.
Using oils of any viscosity other than those recommended could result in
engine damage. When choosing an oil, consider the range of temperature your
vehicle will be operated in before the next oil change. Proceed to select the rec-
ommended oil viscosity from the chart.
Temperature Range for SAE Viscosity Numbers
Temperature
°C
(°F)
-30 -20 -10 0 10 20 30 40 50
-10 0 20 40 60 80 100 120
Petrol
Engine Oil
20W-50
10W-30
15W-40
5W-30, 5W-40
Lambda II
PE 3.3
T-GDI *
1
Theta II 2.0
T-GDI *
2
20W-50
10W-30
15W-40
0/5W-30, 5W-40
Diesel Engine Oil
5W-30
15W-40
10W-30
0W-30
*
1
: For better fuel economy, it is recommended to use the engine oil of a viscosity grade SAE 5W-
30 (ACEA A5 or above). However, if the engine oil is not available in your country, select the
proper engine oil using the engine oil viscosity chart.
*
2
: For better fuel economy, it is recommended to use the engine oil of a viscosity grade SAE 0W-
30 (ACEA C2 or above). However, if the engine oil is not available in your country, select the
proper engine oil using the engine oil viscosity chart.
To Next Page
Loading...
