313
Safety features of your vehicle
Driver position memory system
reset
If the Driver position memory system
reset fails to work, initialize the sys-
tem as follows.
How to initialize:
1. Stop the car and open the driver’s
door with the Engine start/stop
button in ON and the automatic
shift lever in P(parking) position.
2. Pull the driver’s seat forward as far
as possible and have the seatback
upright as much as possible using
driver’s seat forward/backward
adjustment and seatback angle
(recline) movement switches.
3. Push SET button and and seat
fore movement switch button for 2
seconds simultaneously.
Initialization in the process :
1. Initialization begins as the alarm
sounds.
2. The seat and seatback will auto-
matically move backwards. The
alarm sound will continue whilst
the system is in operation.
3. Initialization will be all set after the
seat and seatback move to the
centre with alarm sound being
raised. If, however, cases as fol-
lows occur, the initialization
process will come to a stop and
the alarm sound will stop as well.
- When pushing driving position
memory system button
- When pushing driver’s seat
height adjustment switch
- When relocating the shift lever
from P position to other positions
- When the driving speed exceeds
3km/h
- When the driver’s door is closed
Headrest (for front seat)
The driver's and front passenger's
seats are equipped with a headrest
for the occupant's safety and comfort.
The headrest not only provides com-
fort for the driver and front passen-
ger, but also helps protect the head
and neck in the event of a collision.
OMG038400
To Next Page
Loading...
