311
Safety features of your vehicle
Driver position memory system
(if equipped, for power seat)
Driving Position Memory System is
the facility that enables driver’s seat,
steering wheel, exterior mirrors, clus-
ter and head-up display (HUD) to be
controlled with a simple button oper-
ation, which allows a driver to recall
memorized driving positions and
automatically control them.
- Driver’s seat/Steering Wheel
/Exterior mirrors: location
- Cluster: Brightness of lighting
- Head up Display (HUD): height,
rotation and brightness.
Storing positions into memory
using the buttons on the door
Storing driver’s seat positions
1. Press the Parking button whilst the
engine start/stop button is ON.
2. Adjust the driver’s seat and out-
side rearview mirror and Head up
display comfortable for the driver.
3. Press SET button on the control
panel. The system will beep once.
4. Press one of the memory buttons
(1 or 2) within 5 seconds after
pressing the SET button. The sys-
tem will beep twice when memory
has been successfully stored.
WARNING
Never attempt to operate the
driver position memory system
whilst the vehicle is moving.
This could result in loss of con-
trol, and an accident causing
death, serious injury, or property
damage.
OCK037021R
To Next Page
Loading...
Need help?
General
