319
Safety features of your vehicle
Removal and installation (if equipped)
To remove the headrest, raise it as far
as it can go then press the release
button (1) whilst pulling upward (2).
To reinstall the headrest, put the
headrest poles (A) into the holes
whilst pressing the release button (1).
Then adjust it to the appropriate
height.
Armrest
To use the armrest, pull it forward
from the seatback.
Cup holders are in the arm rest.
WARNING
Make sure the headrest locks in
position after adjusting it to
properly protect the occupants.
OCK037019
OCK037018
To Next Page
