Kicker KX150.4 - Kicker KX Amplifier Specifications; Power Output Specifications; General Specifications

7
Specifications
Model KX150.4
RMS Power
In Watts, All Channels Driven
@ 13.8V, 4Ω Stereo, 0.085% THD 30 x 4
@ 13.8, 2Ω Stereo, 0.2% THD 38 x 4
@ 13.8, 4Ω Mono, 0.4% THD 75 x 2
Dynamic Power
In Watts, All Channels Driven
@ 14.4V, 4Ω Stereo 35 x 4
@ 14.4V, 2Ω Stereo 45 x 4
@ 14.4V, 4Ω Mono 90 x 2
Length with Shroud 11.84”
(30.07cm)
Specifications common to all models
Height::
2.5 inches / 6.35 centimeters
Width::
10.125 inches / 25.7 centimeters
Length Without Shroud::
Subtract 5” / 12.7cm from chart above
Frequency Response::
20 Hz - 20 KHz, + 0, -1dB
Input Sensitivity::
170 mV - 5 V low level, 340 mV - 10 V high level
Signaal--to--Noise Ratio::
>95 dB, a-weighted, re: rated power
Electronic Crossover::
Fixed high or low pass at 80Hz, 12 dB/octave
KickBBass Boost::
Variable 0 to +12 dB boost @ 40 Hz