7
4. Introduction, Product Features and Specifications
Introduction
This alarm detects carbon monoxide using an electrochemical sensor. Many times throughout this User Guide,
we will refer to Carbon Monoxide as “CO.”
Ten (10) years after the unit was installed, this unit will automatically alert you that it is time to replace the unit. This is
called “End of Unit Life” mode. See Troubleshooting Guide. To help track the life of your alarm, write the installation
date in the space provided on the side of the alarm. A label has been provided that has important information on what
to do in case of a CO alarm. Place the label at eye level on a wall near the alarm after it is mounted.
Product Features and Specifications:
•
Temperature Operating Range: -10°C to +40°C
• Humidity Operating Range: up to 90% RH non-condensing
• Audible Alarm: 85+ dB(A) at 3 m, 3.0 to 3.5 kHz pulsing alarm
• CO Sensor: Electrochemical
• CO Alarm Reset
• Powered by AA batteries
• Storage and Transport Conditions: -20° C to +60° C, 5-95%RH (non-condensing)
2030-7202-01_2030-DCR_UG_54x96_TUV_80%.indd 72030-7202-01_2030-DCR_UG_54x96_TUV_80%.indd 7 22-1-7 下午3:1722-1-7 下午3:17
To Next Page
Loading...
