Kidde 2X-AF1-S - Appendix A Default Configurations

2X-A Series Installation Manual 147
Appendix A
Default configurations
The following table shows the settings for the default configuration of your panel.
Table 73: Default configurations
Description
Default setting
Power supply
operation 230 VAC
Control panel ID
01
Day/night mode
Full day to day mode
Control panel network operation
Stand-alone
Network global commands
Yes
Network mask
0 (all panels excluded from the mask)
Repeater panel network operation
Repeater
Repeater mask
All panels repeated
IP address
192.168.104.140
Subnet mask
255.255.255.0
Gateway
0.0.0.0
Port
2505
24V auxiliary
Not deactivated during reset, not deactivated when running
on batteries
Fault mask
All faults are reported
Sounders re
-sound Sounders re-sound
Expansion boards for repeater
panels
Network board is configured
Initial zone
1