Chapter 2: Installation
2X-A Series Installation Manual 43
Connecting an external printer or ASCII terminal
To print control panel events in real time, connect an external EPSON LX300
printer or ASCII terminal to COM0. Only one external printer can be connected.
Note: This option requires the 2010-2-232-KIT (not supplied). The kit contains a
3 m cable and the 2010-2-232-IB isolation board required for external RS-232
device connections.
See “Cabinet and PCB layout” on page 19 for COM0 serial port and RS-232
interface board connector locations.
See “Printer configuration” on page 90 for configuration options.
To Next Page
Loading...
