Kidde GSA-REL - Page 29

Chapter 2: Installation
GSA-REL Technical Reference Manual 21
Figure 8: MFC-A/GSA-REL footprint
Figure 9: GSA-REL mounting holes in compatible cabinets
Releasing Module
footprint
MFC-A
Conduit knockout
Conduit knockout
#6 Flat washers
#6-32
Self-tapping
screws
Releasing Module
Mounting space
Mounting hole diameter is
0.125 in (or 3.175 mm)
Interior surface of enclosure
Interior surface of enclosure
[1]
Notes
[1] Mark the mounting hole locations
here
2. See compatible enclosure
installation sheets for the routing of
power-limited and nonpower-limited
wiring