P/N 3102382-EN • REV 02 • ISS 15DEC16 19
Message priorities
Event messages are stored in a single list or queue. Within the queue they are sorted into priority according to the
event type and the order of event occurrence. The priority of event types is shown in the following lists.
US market
1. Alarm
2. Supervisory
3. Trouble
4. Other
Canadian market
1. Fire alarm
2. Emergency/Life safety
3. Fire supervisory
4. Building/Property safety
5. Trouble
6. Other
Note: The Emergency and Building event types are only used when the K-R Series Remote Annunciator is
connected to a VM-1 panel with C-CPU firmware version 1.40.00 and above, and the system is configured for the
Canadian market.