Kidde P4010ACSCO User Manual

21
13. Permanently Disable Alarm / Discharge Battery
WARNING: FAILURE TO DISCHARGE ALARM BATTERY AS INSTRUCTED PRIOR TO
DISPOSAL MAY CREATE POTENTIAL FOR LITHIUM BATTERY RELATED FIRE OR HAZARD.
WARNING: DISCHARGING THE ALARM BATTERY IS PERMANENT
• Once the alarm battery has been discharged, it cannot be reactivated!
• Once discharged, the alarm will NO LONGER DETECT SMOKE OR CO.
• Once the alarm battery is discharged, the battery is depleted and the alarm will no longer function.
• Once the alarm battery has been discharged, the alarm cannot be mounted onto the mounting plate or reactivated.
To Permanently Disable Alarm / Discharge Battery:
• Rotate the alarm counterclockwise to remove it from the mounting
plate.
• Disconnect AC wiring harness.
• Push in the dashed area with a screwdriver to break tab (Figure 13-A).
• After the tab is broken, use the screwdriver to turn the red slotted
arrow to the "Permanently Disable Alarm / Discharge Battery" loca-
tion. This will disable the alarm, stop the low battery or end of unit
life “chirps” and render the alarm safe for disposal by draining the
battery (Figure 13-B).
Figures 13-A (top) and 13-B (bottom)

Kidde P4010ACSCO Specifications

General

Model	P4010ACSCO
Voice Alerts	Yes
Test/Silence Button	Yes
End of Life Signal	Yes
Wireless Interconnect	No
Hush Feature	Yes
LED Indicator	Yes
Mounting	Ceiling or Wall
Type	Combination Smoke and Carbon Monoxide Alarm
Battery Backup	Yes
Interconnectable	Yes
Alarm Sound	85 dB
Warranty	10 Years
Sensor Type	Electrochemical (CO), Photoelectric (Smoke)