SKP-BC32HL POWER CONTROLLER (E) CE
1
Metal Assembly Screwdrivers are designed for installing threaded fasteners in light
industrial and appliance manufacturing applications.
KILEWS is not responsible for customer modification of tools for applications on which
KILEWS was not consulted.
Important safety information enclosed.
Read all these instructions before placing tool in service or operation this tool and save
these instructions. It is the responsibility of the employer to place the information in this
manual into the hands of the operator. Failure to observe the following warnings could
result in injury. When using electric tools, Basic safety precautions should always be
followed to reduce the risk of fire, electric shock and personal injury, including the
following:
1. General Safety Rules………………………………………………..…….2
2. Operations Cautions…………………………………………………....... 4
3. Main Technical Parameter……………………………………….…….... 5
4. Control Panel Specifications ………………………………………........6
Functions of Keys on Panel …………………………………….7
I/O Inserting Hole Instruction……………………………………8
Dip Switch Functional Instruction……………………………..9
5. System Setting……………………………………………………….…… 10
6. Simulated Learning……………………………………………………..…13
7. Grounding……………………………………………………………..…….13
8. Servicing……………………………………………………………….……13
9. Explosive Drawing for Parts /Spare- Part List………………………..25
一、 重要安全說明事項…………………………………………………..…15
二、操作須知…………………………………………………………………15
三、主要技術參數……………………………………………………………16
四、面板規格…………………………………………………………………17
面板按鍵功能說明……………………………………………..18
I/O 插孔說明……………………………………………………19
功能指撥開關說明…………………………………………..…20
五、 系統設定方式………………………………………………………..…22
六、自動學習設定步驟……………………………………………………….24
七、接地說明……………………………………………………………….…24
八、零件分解圖/零件表………………………………………………………25
NOTICE
WAR NI NG
To Next Page
Loading...
Need help?
General
