Kilews SKP-BC32HL User Manual

SKP-BC32HL POWER CONTROLLER (E) CE 

7
Functions of Keys on Panel：
Key Description of function. Remarks
POWER： Power Switch
To press for six seconds, the system will shut down functions , LED Display light and
WORK light will be shut off.
To return counting function under shutting down counter condition, push three seconds to
open the counter.
CLEAR： Clear Switch
In the middle of counting, push this key for three seconds back to initial.
SELECT：
To push this key three seconds any time to enter system. That is:
SL
----- SC-----At------Rc-----SP-----Ht-----Lt------LL-----CHECK
CONFIRM：
When DIP SW3 ON, reaching set up number , the system will ask the operator to
confirm.
Refer to
CONFIRM mode
UP：
When entering system, this key can increase the number.
This key will point out user set-up number and unit during the process :
U1： No.1 setting number.
U2： No.2 setting number.
U3： No.3 setting number.
U4： No.4 setting number.
U5： No.5 setting number.
DOWN：
When entering system, this key can decrease number.
This key will point out user set-up number and group during the process :
U1： No.1 setting number.
U2： No.2 setting number.
U3： No.3 setting number.
U4： No.4 setting number.
U5： No.5 setting number.
+
When fastening screw, completing work and if mistaken
operation, the buzzer sound will be on.
Wrong operation will be buzzed.
Work completed and wrong operation will cause buzz.
As one screw is fastened and work is completed, buzzer will
be on; wrong operation will be no sound.
S.RESET：SYSTEM RESET
Because of voltage or operation cause system abnormal , push this key back to the initial number.

Kilews SKP-BC32HL Specifications

General

Brand	Kilews
Model	SKP-BC32HL
Category	Controller
Language	English