EasyManua.ls Logo

KiloVault HLX Series - Battery Monitor Configuration

KiloVault HLX Series
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Recharge Volts (≈80% DoD)
Just above your inverter/charger
recharge/rebulk volts so it starts charging from
the sun before the inverter starts charging from
the grid or generator.
4.3 - Battery Monitor Settings
Not all battery monitors will have all of these settings. We’ve tried to include as many as
are common between manufacturers.
Setting
Values - Volts are per battery in a single
string, Amps are per string in parallel
1200 Battery Capacity
1200 Wh, 100 Ah
1200 C-Rating
1.25 C
1800 Battery Capacity
1800 Wh, 150 Ah
1800 C-Rating
1C
3600 Battery Capacity
3600 Wh, 300 Ah
3600 C-Rating
C/2
Battery Efficiency
94.50%
Charge Ending Amps
2 A
Charger Float Current - 1800 - 1% of capacity
1.5 A
Charger Float Current - 3600 - 1% of capacity
3 A
Charger Float Voltage
≈13.6 V
Fully Charged Voltage
14.1 V
Nominal Temperature
77°F (25°C)
Peukert's Exponent
1.05
Recharge / Re-Bulk Volts (≈80% DoD)
12.25 V
Self Discharge Rate
≤2% per month
Temperature Coefficient
0 mV / °C
KiloVault
®
LLC • 330 Codman Hill Road, Boxborough, MA 01719 • +1 (888) 218-5924 • info@kilovault.com www.kilovault.com
14

Related product manuals