CO transmitter
CO 110
KEY POINTS
ABS V0
- duct model: IP65
- ambient model: IP20
LCD 10 digits. Size: 50 x 17 mm
Value: 10 mm; Unit: 5 mm
for cables Ø 8 mm
maximum
138 g (ambient model); 150 g (duct model)
- Range from 0 to 500 ppm
- 0-10 V active output, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop,
power supply from 16 to 30 Vdc (2 wires)
- ABS V0 housing, IP65 (depending on model), with or without display
- “¼ turn” system mounting with wall-mount plate
- Housing with simplified mounting system
FEATURES OF HOUSING
TECHNICAL FEATURES
ppm
From 0 to 500 ppm
±3 ppm or 3% of the measured value
! Electrochemical sensor
"# 5 years
$ T63 = 35 s
$ 0.1 ppm
! Air and neutral gas
%&'$& From 0 to +50 °C. In non-condensing condition. From 0 to 2000 m.
( From -10 to +70 °C
PART NUMBER
)**+
To order, just add the codes to complete the part number :
,&)
- Active – 24 Vac/Vdc – 0-10 V
-Passive – 16/30 Vdc – 4-20 mA
) with display
.without display
/0)**+#)
CO transmitter, 4-20 mA passive transmitter, with display
and duct probe
*All the accuracies indicated in this technical datasheet were stated in laboratory conditions, and can be guaranteed for measurements carried out in the same conditions, or carried out with calibration compensation.
!
- Duct
(-ambient
90 mm
41 mm
80 mm
150 mm
46 mm 90 mm
109 mm
To Next Page
Need help?
General
