5 Maintenance
5.1 Replace the battery
With 4 years* battery life, KISTOCK guarantees long-term measurement.
The icon appears when the battery has to be replaced.
To replace the battery:
1. Unscrew the 4 screws on the back side of the device with a screwdriver.
2. Remove the back side and the old batteries.
3. Insert the new battery and respect the polarity.
➢ Replace the back side and screw it.
Only use trademark or high quality batteries in order to guarantee the announced autonomy.
After the battery replacement, the device must be reconfigured.
5.2 Device cleaning
Please avoid any aggressive solvent.
Please protect the device and probes from any cleaning produce containing formalin, that may be used for cleaning rooms
and ducts.
5.3 Safety lock wall mount with padlock
➢ Mount the safety lock support on the required place.
1. Present the KISTOCK datalogger on the support starting with the inferior part
2. Clip the KISTOCK on the support by falling back the superior part
3. Insert the padlock to ensure the safety lock function
➢ To remove the datalogger from the support, proceed on reverse order.
The padlock can be replaced by a fail-safe sealed
The datalogger can be placed on the screw-mount without the safety lock function
* On the basis of 1 measurement each 15 minutes at 25°C.
Maintenance 15
1 2 3
BAT
1 2 3
To Next Page
Loading...
Need help?
General
