Kinco-HP
User Manual
figure:
When connecting programming cable to HMI-PLC and PC first time, Windows system will
detect new hardware and mention installing driver, users can install the driver according to the
version of Windows.
Fail in installing driver in Windows 7?
If it is simplified Win7 system, it will be lack of files mdmcpq.inf and usbser.sys, so it can not
install the virtual serial port.
These two files are in the path ..\Win7\windows, users can copy these two files to following
path and install the driver again.
Copy mdmcpq.inf to C:\WINDOWS\INF.
Copy usbser.sys to C:\WINDOWS\SYSTEM32\DRIVERS\
How to install driver in Windows 8,Windows10 ?
1、If you can use internet,Win8/Win10 will update driver automatically .
To Next Page
Loading...
