Kinco KS Series Manual

K
K
K
K inco
inco
inco
inco -K
-K
-K
-K S
S
S
S series
series
series
series
15
· Mode
· Voltage
Opto-electrical isolation
500V AC/1 min
� DO Specifications(Transistor type)
Output type Source
Rated power supply voltage
DC24V,allowance range: DC20.4V — DC28.8V.(Same
as power supply)
Output current per channel Rated current:200mA,max.300mA @24VDC
Instant impulse current per channel 1A,less than 1s
Output leakage current Max.0.5 ц A
Output impedance Max. 0.2 Ω
Output delay
· off-to-on
· on-to-off
Common channel: 1 2 μ s; HSC channel: 0.5 s;
Common channel: 35 μ s; HSC channel: 1 μ s;
Protection ：
· Reverse polarity protection of power supply
· Inductive load protection
· Short-circuit protection
· Reverse polarity protection of output
No
Yes
Yes
Yes, less than 10s.
Isolation between output and internal circuit
· Mode
· Voltage
Opto-electrical isolation
500V AC/1 min
Chapter 3 Software Introduction
2.1
2.1
2.1
2.1 Overview
Overview
Overview
Overview
Based on K5, KS use same Kincobuilder software and instructions. Users can reference K5/K2 manual
for most functions. The main difference is the new functions.

Kinco KS Series Specifications

General

Brand	Kinco
Model	KS Series
Category	Controller
Language	English