What to do if signal reflects at the end of Kinco Controller transmission line?
When using Kinco Controller and experiencing signal reflection at the end of the transmission line due to a high 485 communication rate and long communication distance, connect a 120? terminal resistor in parallel at the beginning and end of the communication network.
How to fix poor grounding affecting Kinco Controller performance?
If poor grounding affects the performance of your Kinco Controller, ensure the motor power cable uses a cable with a shielded net. Connect the motor PE to the ground terminal of the driver, and ensure the driver shell is well grounded.
General| Communication Ports | RS232/RS485, Ethernet (depending on model), CAN (depending on model) |
|---|---|
| Power Supply | 24V DC |
| Series | FD5P |
| Type | Controller |
| Display | TFT LCD |
| Touch Panel | Resistive |
To Next Page
